DS Audio Master 1 cartridge Lab Report
The Master 1’s 8.1g bodyweight is offset by a low-ish 15/20cu dynamic compliance, conferring a low ~9Hz subsonic resonance in medium mass arms. As a matter of design, bass output is strong and reaches +4.7dB/20Hz via Output 1 (1st order 30Hz roll-off), +1.4dB/20Hz via Output 2 (50Hz and 30Hz roll-offs) and +0.3dB/20Hz via Output 3 (50Hz, 30Hz and a 2nd order 25Hz roll-off). So the latter Output 3 [see Graph 1] would be the prudent choice when partnering with big, reflex-loaded loudspeakers! Otherwise the Master 1 shares the same boosted presence band and high treble we saw with the DS-002, but this ‘loudness contour’ shows excellent symmetry between in- and out-of-phase cuts, conferring a very uniform colour across the soundstage. As, I might add, does the similarly uniform trend of distortion versus frequency [Graph 2] – an excellent result with any very high frequency distortion tamed by the pick-up’s post-20kHz treble roll-off. PM
Generator type/weight: Photo-optical / 8.1g
Recommended tracking force: 1.6-1.8mN (1.7mN)
Sensitivity/balance (re. 5cm/sec): 1550mV / 0.50dB (from Eq unit)
Compliance (vertical/lateral): 15cu / 20cu
Vertical tracking angle: 25 degrees
L/R Tracking ability: 75μm / 70μm
L/R Distortion (–8dB, 20Hz-20kHz): 0.4–15% / 0.5–5.6%
L/R Frequency resp. (20Hz-20kHz): +2.5 to –9.5dB / +8.1 to –0.5dB
Stereo separation (1kHz / 20kHz): 30dB / 6dB
Price (inc. equaliser): £19,995