ELAC Adante AS-61 loudspeaker Lab Report

Coupled-cavity bass loading enjoyed a brief period of popularity after KEF introduced it in the Reference 104/2 in 1984 (also in the R107 and Two-series models) but we see it infrequently these days. Why ELAC has chosen to revive it is a moot point given that there’s nothing exceptional about the Adante

AS-61’s bass performance – although it does save the need for some crossover components. For its size, and given its 4ohm nominal impedance, the AS-61’s specified 85dB sensitivity looks fair but we couldn’t match that figure, recording 83.4dB on pink noise. This is despite the AS-61 being a moderately challenging load to drive, with a minimum modulus of 3.8ohm and, as a result of quite high LF phase angles, a minimum EPDR (equivalent peak dissipation resistance) of 1.7ohm at 80Hz. Elsewhere in the audio range, though, the EPDR never dips below 3.3ohm.

218elac.lab1.jpg

The AS-61’s forward response is generally flat in trend save for a mild presence ‘notch’ and treble lift

218elac.lab2.jpg

Cabinet is well damped but a mild driver resonance around 10kHz correlates with the treble lift

The forward frequency response, measured at 1m on the axis of the coaxial tweeter shows a slight presence band dip followed by a hump around 10kHz but the response errors are modest at ±3.3dB for both speakers [see Graph 1]. (Ignore the roll-off below 400Hz which is an anomaly caused by the restricted measurement time window.) Pair matching error is poor, though, at ±2.2dB over the same 300Hz-20kHz frequency range. Some justification for the low sensitivity is found in the bass extension, which diffraction-corrected nearfield measurement showed to be 46Hz (–6dB re. 200Hz). But the nearfield measurement also revealed a peak of about 5dB at 170Hz, apparently due to the acoustic low-pass filter being underdamped. The cumulative spectral decay waterfall [Graph 2] is mostly clean but for two modes associated with the 10kHz response hump. PM

Sensitivity (SPL/1m/2.83Vrms – Mean/IEC/Music): 83.7dB / 83.4dB / 83.2dB
Impedance modulus min/max (20Hz–20kHz): 3.8ohm @ 95Hz / 29.3ohm @ 33Hz
Impedance phase min/max (20Hz–20kHz): –63° @ 66Hz / 40° @ 20kHz
Pair matching/Response Error (300Hz–20kHz) ±2.2dB / ±3.3dB/±3.3dB
LF/HF extension (–6dB ref 200Hz/10kHz): 46Hz / 37.2kHz / 24.6kHz
THD 100Hz/1kHz/10kHz (for 90dB SPL/1m): 0.5% / 0.2% / 0.5%
Dimensions (HWD): 484x244x402mm
Price: £2600

COMPANY INFO
ELAC Electroacustic GmbH
Kiel, Germany
Supplied by: Hi-Fi Network
01285 643088
ARTICLE CONTENTS

X