JBL L100 Classic Loudspeaker Lab Report

Lab Report

It isn't often these days that we encounter a speaker which is distinctly conservative in its sensitivity specification but the L100 Classic harks back to earlier times in more ways than one. JBL claims 90dB at 1m for 2.83V input, but we measured an even stronger 91.6dB on pink noise, which would be more than enough for others to claim 92dB. On the face of it JBL has not resorted to punishingly low impedance to achieve this – the L100 Classic is honestly specified as 4ohm nominal (no '8 ohms compatible' nonsense) and we measured a minimum impedance of 3.5ohm. Unfortunately its low frequency impedance phase angles are very high as a result of which the EPDR (equivalent peak dissipation resistance) dips to a low of 1.3ohm at 82Hz. In other words, this speaker does present a pretty tough (low frequency) amplifier load even for a modern design.

719jbl.response

Response with controls at '0dB' shows broad peak at 2kHz – 12 o'clock setting yields a flatter result

719jbl.water

Cabinet is well enough controlled but there are a cluster of driver modes between 4-8kHz

The forward frequency responses, measured on the tweeter axis with the HF and MF level controls set to 0dB, show peaks and dips of ±3.1dB and ±3.5dB respectively [see Graph 1]. The peak at 2kHz and plateau between 4kHz and 6kHz probably explain why, during the listening sessions, both controls were dialled back to 12 o'clock, which shelves down the output by a few dB above 700Hz. Pair matching was fair at ±1.1dB. Diffraction-corrected summed nearfield driver and port outputs show a bass response that's flat to 70Hz, rolling off with a roughly second-order slope immediately below before the full fourth-order roll-off kicks in at about 40Hz. The 'official' bass roll-off point is at 42Hz (–6dB re. 200Hz). Finally, the CSD waterfall [Graph 2] shows a tightly packed group of treble resonances from 4kHz to 8kHz. KH

Sensitivity (SPL/1m/2.83Vrms – Mean/IEC/Music) 91.0dB/91.6dB/91.7dB
Impedance modulus min/max (20Hz–20kHz) 3.5ohm @ 125Hz, 40.7ohm @ 20Hz
Impedance phase min/max (20Hz–20kHz) –81° @ 62Hz, 21° @ 20kHz
Pair matching/Response Error (350Hz–20kHz) ±1.1dB/ ±3.1dB/±3.5dB
LF/HF extension (–6dB ref 200Hz/10kHz) 42Hz / >40kHz/29.5kHz
THD 100Hz/1kHz/10kHz (for 90dB SPL/1m) 0.1% / 0.1% / 0.1%
Dimensions (HWD) / Weight 637x390x372mm / 27kg
Price £3999
COMPANY INFO
Harman International Industries
CA, USA
Supplied by: Harman Luxury Audio Group, Cambs
01223 203200
ARTICLE CONTENTS

X